GVS 40 Kevlar Pressure Pole - High-Pressure Insulated Carbon-Fibreglass Pole (40ft Extended) With Conversion Kit

GVS 40 Pressure Pole - 40ft High-Pressure Carbon-Fibreglass Pole with Conversion Kit

The GVS 40 Pressure Pole is a carbon fibre, kevlar fibreglass pole designed for high-pressure roof cleaning and exterior cleaning at height when used with a compatible pressure-washing conversion setup. The pole features two lower sections insulated and test validated 37.5kV.

Choose the hose type that best suits your working requirements.

Choose Your High-Pressure Hose

Each complete kit includes one high-pressure hose, selected using the Choose Hose Type option:

• Standard High-Pressure Hose - 45ft: Rated to 225 bar (3263 PSI). Working temperatures from -40°C to +155°C. Approx weight 2.3kg.
• Green Lightweight High-Pressure Hose - 50ft: Rated to 200 bar (2900 PSI) and suitable for working temperatures from -40°C to +60°C. Approx weight 1.45kg.

What's Included

• 1 x 40ft GVS Kevlar Pressure Pole 
• 1 x high-pressure hose in your selected type (45ft standard or 50ft lightweight)
• 1 x anodised pole adaptor - 22mm outside diameter
• 1 x fully adjustable angled nozzle holder - M22 inlet and quick-release outlet
• 1 x ST601 Suttner inline pole trigger with mounting clamps
• Inlet fittings for common pressure-washer connections, including M22 male, Tema Quick Release, 3/8-inch BSP threaded and MIDI Quick Releases

40ft Pressure Pole Specifications

• 100% carbon-fibre first 6 upper sections
• Kevlar fibreglass insulated lower 2 sections sections
• 8 pole sections (sections 2 to 9), matt finish
• Metal locking levers
• Weight: approximately 2.96kg
• Fully extended length: 40ft
• Collapsed length: approximately 181cm (5ft 9in)

Electrical Testing and Verification

The Kevlar-fibreglass lower sections have undergone laboratory dielectric testing, followed by additional independent dielectric testing in the UK to verify their electrical insulation performance.

Each pole is supplied with a Gutter Vacuum Systems test verification certificate recording its validated test date and the applicable results.

The lower sections withstood test voltages of 37.5kV for one minute, as detailed in the applicable test reports. These results relate to the tested sections under the stated test conditions and are not a safe working voltage rating for the complete pole.

The carbon fibre upper sections are electrically conductive. This pole is not intended for live electrical work. Keep the pole and all attachments clear of electrical cables and equipment.